Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Falmouth, MA
We provide independent Lennox service across Falmouth, from full system cleaning and video inspection to duct sealing and repair. What sets our Lennox work apart in Falmouth is diagnostic depth on the parts that fail here specifically: return plenums, register boots, and coil cabinet seams that take a beating from salt air and seasonal occupancy. We’re an independent shop, not a Lennox dealer, and we’re not affiliated with or authorized by the manufacturer. Our technicians have up to 15 years of experience with Lennox equipment. Call (844) 793-0706. We answer 24/7.
Why Falmouth Residents Choose Us for Lennox Service
Falmouth homeowners call us because we understand Lennox systems specifically, not just ductwork in general. That matters more than it sounds. Lennox air handlers, cased coils, and furnace plenums have particular failure patterns, and someone who hasn’t worked on them before will miss things that someone who has will catch in the first twenty minutes.
We use contractor-grade equipment from Rotobrush, Nikro, and Abatement Technologies, the same hardware brands professional remediation contractors rely on. Not a shop vac with a long hose. Your ducts are only as clean as the process behind it, and we show that process through video inspection before and after the work.
We also know Falmouth. The marine environment here does things to ductwork that inland systems don’t experience, and our service reflects that. Whenever we’re called to a Falmouth home, we’re looking for signs of salt damage, moisture intrusion, and seasonal-occupancy problems alongside the usual dust and debris.
Scheduling is straightforward. Call between dispatch hours, Sunday through Friday, 7am to 7pm, and we’ll find a time that works. The estimate is free, and the price is set per job by the written estimate before any work starts.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Falmouth
Lennox systems in Falmouth fail in fairly consistent patterns. These are the ones we see most often:
- Corroded return plenums on second-row coastal homes. Salt-laden air accelerates rust at the seams of Lennox galvanized return plenums. On properties near Surf Drive and the Heights, we find pitted duct joints and register boots that have corroded from the inside out, often long before the homeowner notices a problem.
- Condensation inside variable-speed air handlers. An Elite Series air handler sitting in a damp crawlspace or attic develops condensation on the blower housing and inside the coil cabinet. In Falmouth cottages closed up for winter, that moisture feeds mold and produces the musty smell owners notice on the first warm-weather startup.
- Coastal grit loading the blower wheel and coil. Older Merit Series furnaces connected to retrofit short-run flex ductwork pull salt air and pollen through loose joints. The blower wheel and evaporator coil collect a gritty buildup that reduces airflow and makes the whole system work harder.
- Failed mastic at cased coil seams. A Lennox cased coil whose seams were sealed with mastic will often fail at those seals in humid maritime conditions. Air-leak bypass across the coil reduces airflow and stresses the heat exchanger over our cold damp winters.
- Mold-prone flex duct interiors in closed-up seasonal homes. Flex duct with an internal liner traps moisture in a way sheet metal doesn’t. When a Falmouth summer home sits unoccupied through winter, that liner becomes a grow site. A spring cleaning often turns up growth the owner has no other way of finding.
Lennox Service in Falmouth: What Local Conditions Mean for Your Equipment
Falmouth’s large share of summer-only second homes creates a duct problem you won’t find inland. A Lennox system in a seasonal cottage sits sealed up through cold, damp winters without any air moving through it. Moisture condenses inside the flex duct and the air handler cabinet. Salt air works on the return grilles and galvanized joints with nothing to counteract it. By the time the owners return in spring, the system has been sitting in that environment for months.
The first warm-weather startup then pushes musty air through salt-crusted return grilles and duct liner that has had all winter to develop mold. That’s why spring cleanings in Falmouth so often uncover findings that year-round occupied homes in the region never accumulate. It’s not that the equipment is worse here. It’s that seasonal occupancy gives moisture and salt time they don’t get in a home where the system runs daily. A typical job in this situation starts with video inspection of the return and supply runs, then cleaning of the blower wheel, evaporator coil, and duct interiors, followed by sealing failed seams and replacing corroded register boots so the system stops pulling marine air and moisture into the living space.
Lennox Models & Products We Service in Falmouth
We service the Lennox equipment families common in Falmouth, from older G-series furnaces to modern Merit Series gas furnaces and Elite Series variable-speed air handlers and furnaces. That includes Lennox XC and XP series outdoor units paired with indoor coils, and HC and XC series evaporator coils and cased coils.
On parts, we’re practical. For blower wheels, coil cabinets, and control components, where fit and calibration matter, we use OEM Lennox parts. For generic duct hardware like flex, mastic, and register boots, quality aftermarket components do the job well at a fairer price. We choose what fits best, not what’s easiest to source. We don’t stock or carry parts, and we’re not a dealer; we source what your system needs for the repair.
For a closer look at how we approach Lennox systems, we’re glad to walk you through it.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Falmouth
Lennox air duct cleaning in Falmouth depends on the scope of the job and what we find once we’re inside the system. Full system cleaning, video inspection, and duct sealing are priced separately because they’re different amounts of work.
What drives the cost:
- The size and layout of your Lennox duct system, including how many runs and how accessible they are.
- Whether we’re working in an attic, crawlspace, or basement, and how much setup that requires.
- Whether the inspection turns up failed seams, corroded boots, or flex liner that needs attention.
- Whether you’re adding duct sealing alongside the cleaning or scheduling it separately.
Your free estimate includes a walkthrough and an honest scope of what your system needs. The written estimate sets the final price, one flat price per system agreed before any work starts. No per-vent pricing, no surprises once we’re on site. Call (844) 793-0706 for an exact quote.
Serving Falmouth, MA – Our Local Coverage Area
We serve Falmouth and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Falmouth
Salt-laden marine air reacts with the galvanized surface of your return grilles and duct joints. Homes near the water, especially second-row properties, see this faster than inland homes, and pitting is often the first visible sign of salt corrosion deeper in the system. A video inspection will show you how far it goes. Call (844) 793-0706 for a free estimate.
In most cases, yes. When the system sits idle through damp winter months, condensation forms inside the air handler cabinet and flex duct, and mold develops on the liner and coil surfaces. The first startup pushes that air through the house. Cleaning the blower, coil, and duct interiors usually clears it. Call (844) 793-0706 to book an inspection.
Yes. Video inspection shows you pitted joints, failed mastic at the coil cabinet, mold on flex liner, and bypass leaks that a cleaning alone won’t reveal. We record before-and-after footage so you can see exactly what was there and what was done. It’s the difference between trusting a claim and seeing the evidence. Call (844) 793-0706 for a free estimate.
In most cases, repair makes sense. A corroded coastal plenum or a failed coil cabinet seam is usually worth fixing, and we do that alongside cleaning. But if the heat exchanger has been compromised by years of damp-air bypass, replacement becomes the honest recommendation. We’ll tell you which situation you’re in. Call (844) 793-0706.
It does. Coastal humidity accelerates condensation on the blower housing and coil cabinet, and in a seasonal home that moisture has months to sit. Over time it encourages corrosion on the coil fins and mold growth on the blower wheel. Regular cleaning and sealing help slow it down. Call (844) 793-0706 for a free estimate on your Falmouth system.
Service Areas Near Falmouth
We also work on Lennox systems in East Falmouth, North Falmouth, and the surrounding towns of New Bedford, Acushnet Center, Smith Mills, Bliss Corner, Mattapoisett Center, and North Westport. If you’re not sure whether your address falls within our coverage, give us a call and we’ll let you know.
Book Your Lennox Service in Falmouth Today
If your Lennox system hasn’t had attention in a while, or you’ve noticed musty air, corroded grilles, or reduced airflow, call (844) 793-0706. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free, the price is set per job by the written estimate, and you’ll see before-and-after photos of your own ducts when we’re done. We’re licensed and insured.
Written by the team at Duct Cleaning New Bedford.